Introduction
The UTP9080 series is a versatile, extendable, universal test stand for ICT, functional testing and end-of-line tests of circuit boards. The boards under test can be connected one-sided, double-sided or step by step for multi-panel applications. Because of its automated feeder system, conveyor belt and interlocking, the system allows short tooling times and offers compatibility with all established tester systems.
At a fixed transportation height of 36.7“, the transportation width is variable, ranging from 1.97” to 15.75”. The integrated conveyor belt, which allows a transportation direction from left to right, is antistatic. By means of a knee lever mechanism, a screw drive and an AC servo drive an adjustable contacting stroke could be realized.
The upper and lower interfaces for the interchangeable fixture adapter each comprise 1.700 testing points and a user-defined number of pneumatic interface units that can be used instead of conventional interface units.
For the handover from the upper to the lower interface there are at most 680 testing points and also a user-defined number of pneumatic interface units. Altogether, it is possible to conduct tests with a maximum of 4080 testing points.
The outer dimensions are 29.92“ x 35.43” x 70.86” (L x W x H). The system weighs about 1190 lbs and requires a power supply of 3 x 400 V/AC, 50/60 Hz.
The UTP 9080 offers maximum flexibility because it can be upgraded as required. Therefore, it is possible to modify the test stand flexibly and individually according to the changing demands. The system is equipped with the NOFFZ software framework, the NOFFZ SDR, measurement equipment based on PXI and all required customized units.
At a fixed transportation height of 36.7“, the transportation width is variable, ranging from 1.97” to 15.75”. The integrated conveyor belt, which allows a transportation direction from left to right, is antistatic. By means of a knee lever mechanism, a screw drive and an AC servo drive an adjustable contacting stroke could be realized.
The upper and lower interfaces for the interchangeable fixture adapter each comprise 1.700 testing points and a user-defined number of pneumatic interface units that can be used instead of conventional interface units.
For the handover from the upper to the lower interface there are at most 680 testing points and also a user-defined number of pneumatic interface units. Altogether, it is possible to conduct tests with a maximum of 4080 testing points.
The outer dimensions are 29.92“ x 35.43” x 70.86” (L x W x H). The system weighs about 1190 lbs and requires a power supply of 3 x 400 V/AC, 50/60 Hz.
The UTP 9080 offers maximum flexibility because it can be upgraded as required. Therefore, it is possible to modify the test stand flexibly and individually according to the changing demands. The system is equipped with the NOFFZ software framework, the NOFFZ SDR, measurement equipment based on PXI and all required customized units.
Available extras
- Antistatic cover
- Barcode scanner
- Automated adjustment of the system width
- Integrated module for remote maintenance
- Transportation direction from right to left
- Conveyor belt with by-pass functionally
- integrated pusher for the reduction of handling times
- Component height: surface: 4.72“, bottom side: 1.38”
Advantages
- Short handling times: ca. 5s with conveyor belt and minor component height
- Adjustable transportation width: 1.97” to 15.75”
- Transportation speed: 39.37“/min
- Antistatic conveyor belt
- Testing with at most 4080 testing points
- Adjustable contacting stroke
Conclusion
The UTP9080 series is a versatile, upgradable test stand for ICT, FCT and end-of-line tests of circuit boards, offering short handling times and testing with 4080 testing points.
The tester comprises an antistatic conveyor belt and offers a variable transportation width ranging from 1.97” to 15.75”. It can be adjusted and modified flexibly according to the constantly changing demands towards any production environment.